Development of 3D printable formulations containing CNT with enhanced electrical properties

Publication date: 27 January 2017
Source:Polymer, Volume 109
Author(s): Gustavo Gonzalez, Annalisa Chiappone, Ignazio Roppolo, Erika Fantino, Valentina Bertana, Francesco Perrucci, Luciano Scaltrito, Fabrizio Pirri, Marco Sangermano
This study demonstrates the feasibility of printing 3D composite objects based on acrylic photocurable formulations containing CNTs, by using an unmodified commercial DLP-printer. In the preliminary investigations, the most suitable formulation was developed. Viscosity and dispersion stability were adjusted by the addition of a reactive diluent to the acrylic formulation. FT-IR analyses in real time and photorheology tests allowed finding the best composition and printing parameters.Printing conditions were adjusted to get 3D structures from formulations with a content up to 0.3 wt % of CNTs. The presence of the filler causes a decrease of the crosslinking density, which could be overcome using higher intensity light sources. Electrical conductivity measurements performed on the printed samples give promising results for the use of the developed formulation for the building of 3D structures with electrical properties.

Graphical abstract

http://ift.tt/2hM58Wk