Ετικέτες

Τρίτη 20 Δεκεμβρίου 2016

Fe-based soft magnetic composites coated with NiZn ferrite prepared by a co-precipitation method

Publication date: 15 April 2017
Source:Journal of Magnetism and Magnetic Materials, Volume 428
Author(s): Yuandong Peng, Yi Yi, Liya Li, Hengyu Ai, Xiaoxu Wang, Lulu Chen
Fe powder was coated with NiZn ferrite by a co-precipitation method using chlorate as the raw material. Soft magnetic composites were manufactured via compaction and heat treatment of the coated powder. The coated powder and heat treated powder were analysed using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and Raman spectroscopy. Their magnetic properties were determined using a Quantum Design-Vibrating Sample Magnetometer (QD-VSM). The composites were analysed with SEM and EDS. The permeability and magnetic loss of the composites were measured with a B-H curve analyzer. The results show that, using the co-precipitation method, the raw precipitate was successfully prepared and coated the pure Fe powder and turned into spinel NiZn ferrite treated at 600℃ for 1h. After heat treatment at 500℃ under air, the insulation coating layer of soft magnetic composite (SMC) was not destroyed and containing Fe, Ni, Zn and oxygen. The permeabilities of the SMC are stable at edge of the 2–200kHz frequency range and the total loss was lower.

Graphical abstract

image


http://ift.tt/2idDbGL

Δεν υπάρχουν σχόλια:

Δημοσίευση σχολίου

Αναζήτηση αυτού του ιστολογίου