Ετικέτες

Τρίτη 14 Φεβρουαρίου 2017

Coronary Artery Stent Evaluation with Model-based Iterative Reconstruction at Coronary CT Angiography

alertIcon.gif

Publication date: Available online 14 February 2017
Source:Academic Radiology
Author(s): Fuminari Tatsugami, Toru Higaki, Hiroaki Sakane, Wataru Fukumoto, Yoko Kaichi, Makoto Iida, Yasutaka Baba, Masao Kiguchi, Yasuki Kihara, So Tsushima, Kazuo Awai
Rationale and ObjectivesThis study aims to compare the image quality of coronary artery stent scans on computed tomography images reconstructed with forward projected model-based iterative reconstruction solution (FIRST) and adaptive iterative dose reduction 3D (AIDR 3D).Materials and MethodsCoronary computed tomography angiography scans of 23 patients with 32 coronary stents were used. The images were reconstructed with AIDR 3D and FIRST. We generated computed tomography attenuation profiles across the stents and measured the width of the edge rise distance and the edge rise slope (ERS). We also calculated the stent lumen attenuation increase ratio (SAIR) and measured visible stent lumen diameters. Two radiologists visually evaluated the image quality of the stents using a 4-point scale (1 = poor, 4 = excellent).ResultsThere was no significant difference in the edge rise distance between the two reconstruction methods (P = 0.36). The ERS on FIRST images was greater than the ERS on AIDR 3D images (325.2 HU/mm vs 224.4 HU/mm; P < 0.01). The rate of the visible stent lumen diameter compared to the true diameter on FIRST images was higher than that on AIDR 3D images (51.4% vs 47.3%, P < 0.01). The SAIR on FIRST images was lower than the SAIR on AIDR 3D images (0.19 vs 0.30, P < 0.01). The mean image quality scores for AIDR 3D and FIRST images were 3.18 and 3.63, respectively; the difference was also significant (P < 0.01).ConclusionThe image quality of coronary artery stent scans is better on FIRST than on AIDR 3D images.



http://ift.tt/2lfvrZS

Δεν υπάρχουν σχόλια:

Δημοσίευση σχολίου

Αναζήτηση αυτού του ιστολογίου