Ετικέτες

Παρασκευή 28 Ιουλίου 2017

Influence of HfH2 addition on the microstructure and mechanical properties of TiC-NiTi cermets

Publication date: 5 November 2017
Source:Materials & Design, Volume 133
Author(s): Bolu Liu, Shuigen Huang, Jan Van Humbeeck, Jef Vleugels
(Ti,Hf)C0.7 cermets with different Ti/Hf atomic ratio and 20vol% NiTi binder were prepared by pressureless liquid-phase sintering at 1380°C for 60min. The Hf content was modified by adding up to 42.4wt% HfH2 powder in a TiC0.95+Ni49.4Ti50.6+TiH2 starting powder mixture. Upon HfH2 addition, the binder phase changed from austenite to martensite NiTi. The actual Hf content in the (Ti,Hf)C0.7 at different HfH2 addition was slightly lower than the theoretical value, due to some Hf dissolution in the binder phase. The (Ti,Hf)C0.7 grain size and binder mean free path length decreased whereas the apparent porosity slightly increased with increasing HfH2 content up to 42.4wt% HfH2. The hardness increased with increasing HfH2 addition up to 42.4wt%, while the elastic modulus remained the same. The bending strength and fracture toughness increased with increasing HfH2 addition to 19.9wt% but decreased upon further increasing the HfH2 content up to 42.4wt%.

Graphical abstract

image


http://ift.tt/2u685X9

Δεν υπάρχουν σχόλια:

Δημοσίευση σχολίου

Αναζήτηση αυτού του ιστολογίου