Ετικέτες

Κυριακή 11 Φεβρουαρίου 2018

Zirconia toughened mica glass ceramics for dental restorations

S01095641.gif

Publication date: Available online 1 February 2018
Source:Dental Materials
Author(s): Sivaranjani Gali, Ravikumar K., B.V.S. Murthy, Bikramjit Basu
ObjectiveThe objective of the present study is to understand the role of yttria stabilized zirconia (YSZ) in achieving the desired spectrum of clinically relevant mechanical properties (hardness, elastic modulus, fracture toughness and brittleness index) and chemical solubility of mica glass ceramics.MethodsThe glass–zirconia mixtures with varying amounts of YSZ (0, 5, 10, 15 and 20wt.%) were ball milled, compacted and sintered to obtain pellets of glass ceramic-YSZ composites. Phase analysis was carried out using X-ray diffraction and microstructural characterization with SEM revealed the crystal morphology of the composites. Mechanical properties such as Vickers hardness, elastic modulus, indentation fracture toughness and chemical solubility were assessed.ResultsPhase analysis of sintered pellets of glass ceramic-YSZ composites revealed the characteristic peaks of fluorophlogopite (FPP) and tetragonal zirconia. Microstructural investigation showed plate and lath-like interlocking mica crystals with embedded zirconia. Vickers hardness of 9.2GPa, elastic modulus of 125GPa, indentation toughness of 3.6MPa·m1/2, and chemical solubility of 30μg/cm2 (well below the permissible limit) were recorded with mica glass ceramics containing 20wt.% YSZ.SignificanceAn increase in hardness and toughness of the glass ceramic-YSZ composites with no compromise on their brittleness index and chemical solubility has been observed. Such spectrum of properties can be utilised for developing a machinable ceramic for low stress bearing inlays, onlays and veneers.



http://ift.tt/2G6qwRY

Δεν υπάρχουν σχόλια:

Δημοσίευση σχολίου

Αναζήτηση αυτού του ιστολογίου