Ετικέτες

Πέμπτη 19 Οκτωβρίου 2017

Anisotropic Ti-6Al-4V gyroid scaffolds manufactured by electron beam melting (EBM) for bone implant applications

Publication date: 5 January 2018
Source:Materials & Design, Volume 137
Author(s): Arash Ataee, Yuncang Li, Darren Fraser, Guangsheng Song, Cuie Wen
Ti-6Al-4V gyroid scaffolds with high porosities in the range of 82–85% and three different unit cell sizes 2, 2.5 and 3mm were manufactured by electron beam melting (EBM) for bone implant applications. The microstructure, mechanical properties and failure mode of the scaffolds with different sample orientations were evaluated. The as-built struts showed orthogonally orientated martensite α′ needles in columnar grains along the building direction with an average hardness of 3.89GPa and the elastic modulus and yield strength of scaffolds ranged from 637 to 1084MPa and from 13.1 to 19.2MPa, respectively. The elastic modulus and yield strength along the build direction and perpendicular to building direction varied by ~70% and 49%, respectively, depending on the amount of structural anisotropy and unit cell size. The ratio of elastic modulus anisotropy in orthogonal directions was comparable to those of trabecular bone and could be in favor of bone implant applications. Furthermore, as-built scaffolds showed a mixed mode of ductile and brittle behavior under compression, and the dominant failure mode was by forming orthogonal crush bonds at the peak loads with an angle of ~45° with compression axis.

Graphical abstract

image


http://ift.tt/2yuv5VL

Δεν υπάρχουν σχόλια:

Δημοσίευση σχολίου

Αναζήτηση αυτού του ιστολογίου