Efficient removal of copper from wastewater by using mechanically activated calcium carbonate

Publication date: 1 December 2017
Source:Journal of Environmental Management, Volume 203, Part 1
Author(s): Huimin Hu, Xuewei Li, Pengwu Huang, Qiwu Zhang, Wenyi Yuan
Copper removal from aqueous solution is necessary from the stances of both environmental protection and copper resource recycling. It is important to develop a new chemical precipitation method suitable for removing copper particularly at low concentration as the case of waste mine water, with regards to the various problems related to the current precipitation methods by using strong alkalis or soluble sulfides. In this research, we studied a possible chemical precipitation of copper ions at concentration around 60 mg/L or lower by cogrinding copper sulfate in water with calcium carbonate (CaCO3) using wet stirred ball milling. With the aid of ball milling, copper precipitation as a basic sulfate (posnjakite: Cu4 (SO4) (OH)6·H2O) occurred at a very high copper removal rate of 99.76%, to reduce the residual copper concentration in the solution less than 0.5 mg/L, reaching the discharge limit, even with the addition amount of CaCO3 as a stoichiometric ratio of CaCO3/Cu²⁺at 1:1. It is more interesting to notice that, at the same conditions, other heavy metals such as Ni, Mn, Zn and Cd do not precipitate obviously just with CaCO3 addition at CaCO3/M²⁺at 1:1 so that the precipitate without the impurities can be processed as good source to recover copper. This newly proposed concept can be further developed to treat wastewaters with other metals to serve both purposes of environmental purification and resource recovery in a similar way.

Graphical abstract

http://ift.tt/2uXJibv