Exposure to nanoscale and microscale particulate air pollution prior to mining development near a northern indigenous community in Québec, Canada

Abstract

This study serves as a baseline characterization of indoor and outdoor air quality in a remote northern indigenous community prior to the start of a major nearby mining operation, including measurements of nanoparticles, which has never been performed in this context before. We performed aerosol sample collection and real-time aerosol measurements at six different locations at the Cree First Nation of Waswanipi and the Montviel campsite, located 45 km west of the Cree First Nation of Waswanipi, in the south of the Nord-du-Québec region. High concentrations of airborne nanoparticles (up to 3.98 × 10⁴ ± 8.9 × 10³ cm⁻³ at 64.9-nm midpoint particle diameter) and fine particles (up to 1.99 × 10³ ± 1.6 × 10² cm⁻³ at 0.3-μm midpoint particle diameter) were measured inside a residential home, where we did not find any ventilation or air filtration systems. The most abundant particle sizes by mass were between 0.19 and 0.55 μm. The maximum concentration of analyzed heavy metals was detected at the d₅₀ cut-off particle size of 0.31 μm; and the most abundant heavy metals in the aerosol samples were Al, Ba, Zn, Cu, Hg, and Pb. We concluded that the sources of the relatively high indoor particle concentrations were likely laundry machines and cooking emissions in the absence of a sufficient ventilation system. However, the chemical composition of particles resulting from mining activities is expected to be different from that of the aerosol particles from indoor sources. Installation and proper maintenance of sufficient ventilation and air filtration systems may reduce the total burden of disease from outdoor and indoor air pollution and remediate infiltrated indoor particulate pollution from the mining sources as well.

http://ift.tt/2myV1Zg