Effect of hydrothermal treatment on light transmission of translucent zirconias

Publication date: Available online 21 February 2017
Source:The Journal of Prosthetic Dentistry
Author(s): Armand Putra, Kwok-Hung Chung, Brian D. Flinn, Tuesday Kuykendall, Cheng Zheng, Kosuke Harada, Ariel J. Raigrodski
Statement of problemStudies of the light transmission of translucent zirconias after hydrothermal treatment are limited.PurposeThe purpose of this in vitro study was to evaluate the effect of hydrothermal treatment on the light transmission of translucent zirconias for monolithic restorations.Material and methodsFour commercially available zirconia products, BruxZir Anterior Solid Zirconia (BruxAnt, BA), Lava Plus High Translucency (LPHT), Katana Zirconia Super Translucent (KST), and Katana Zirconia Ultra Translucent (KUT) were assessed and 1 type of lithium disilicate, e.max Press LT (LDLT) was used as a control. Plate specimens, 20×20×1 mm (n=80) for the translucency assessment were sectioned from postsintered zirconia bulk materials and ground with a #400-grit diamond wheel and coolant. The specimens were placed under hydrothermal conditions of 134°C at 0.2 MPa (n=5 per group at 0, 5, 50, and 100 hours). Percentage of total transmittance of light (Tt%) of each specimen was measured using a spectrophotometer with an integrating sphere. X-ray diffraction analyses were used to measure tetragonal-monoclinic phase transformation. Surfaces were examined by scanning electron microscopy and energy dispersive spectrometry. Data were analyzed using 2-way ANOVA followed by the Tukey test (α=.05).ResultsThe Tt% ranged from 6.5% to 28.3%. Group LDLT obtained significantly higher transmittance than other tested groups, whereas groups KST and KUT had significantly higher Tt% than groups BA and LPHT (P<.05). A statistically significant increase in the amount of monoclinic phase was revealed within all translucent zirconia groups (P<.05), and the increase in group LPHT was significantly higher than those of the other 3 translucent zirconias (P<.05). Minimal changes in the percentages of light transmittance were revealed after 100-hour hydrothermal treatment for all tested translucent zirconias and a lithium disilicate glass-ceramic control.ConclusionsHydrothermal treatment had minimal effects on the translucency of translucent zirconias. The tetragonal-monoclinic phase transformation rate of translucent zirconias was found to be low, except in group LPHT.



http://ift.tt/2l3mzDi