Ετικέτες

Σάββατο 30 Ιουνίου 2018

Enhancement of hardness, modulus and fracture toughness of the tetragonal (Fe,Cr)2B and orthorhombic (Cr,Fe)2B phases with addition of Cr

Publication date: 15 October 2018
Source:Materials & Design, Volume 156
Author(s): Jonathan Lentz, Arne Röttger, Felix Großwendt, Werner Theisen
This study analyzes the influence of Cr content on hardness H, elastic modulus E and fracture toughness KIC of the M2B boride by means of nanoindentation experiments. Additionally, properties of the Fe3(C,B) phase are determined. Samples of the M2B phase are casted and microstructurally characterized by means of scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction. At a Cr content higher than 14.7 atom% the M2B phase transforms from tetragonal into orthorhombic structure. The tetragonal M2B type possesses an optimum of H (21 ± 1 GPa), E (373 ± 6) GPa and KIC (3.5 ± 0.7 MPam) at 4–5 atom% Cr. The hardness, modulus and toughness of the orthorhombic M2B phase increase with Cr content and reach values of H = 27 ± 0.7 GPa, E = 473 ± 9 of and KIC = 3.26 ± 0.8 MPam at maximal investigated Cr content of 55 atom%. The hardness of the M2B phases decreases around 2.3–3.2 GPa as a function of indentation depth, which is known as the indentation size effect. Hardness and fracture toughness of M2B phase outperform conventionally used M7C3 carbides and are similar to MC-carbides. Findings can be used in novel alloying approaches in order to optimize the performance and reduce cost of tool steels.

Graphical abstract

image


https://ift.tt/2tGWGQd

Δεν υπάρχουν σχόλια:

Δημοσίευση σχολίου

Αναζήτηση αυτού του ιστολογίου